3M™ Trizact™ Hookit™ Foam Abrasive 3000 Disc 443SA, 150 mm, 3000, 02085
- Part Number 02085
- 3M Product Number 443SA
- 3M ID 7100311882
- UPC 00051131020856
Details
Highlights
- Designed to refine 1500- and 2000 grade sand scratches and thus reducing overall finishing time
- Always used damp, they deliver long life and less loading than dry sanding
- Foam backing provides plenty of control and consistent contact with the surface
- Suitable for both machine and hand applications. When using a dual-action sander, make at least five passes with 50% overlap
- Reduce the need for aggressive compounding with 3000-grade 3M™ Trizact™ Hookit™ Foam Abrasive Sheets for paint finishing
- Compared to traditional compounding, using 3M™ Trizact™ Abrasives for removing sand scratches can reduce the possibility of swirl marks, burn through, and other defects caused by more aggressive processes
- Allows technicians to refine paint scratches using a lighter orbital sander instead of a heavier polisher
- Available in a variety of sizes and formats
Spend less time compounding and enjoy less risk of defects by using 3000-grade 3M™ Trizact™ Hookit™ Foam Abrasive Discs for paint finishing. Used for refining 1500- and 2000-grade sand scratches, they can reduce the need for aggressive wool compounding and cut overall paint finishing time. The patented 3M™ Trizact™ Abrasives are engineered for consistent cut and long life.
You'll see long abrasive life and consistent finishes thanks to the patented 3M™ Trizact™ Abrasives. They are built with our unique three-dimensional structures which wear to reveal fresh, sharp abrasive mineral.
3M™ Trizact™ Hookit™ Foam Abrasive Disc 3000 can reduce the risk of heavy swirl marks which can be introduced during aggressive compounding. Used damp, they deliver the anti-loading benefits of wet sanding without the productivity-reducing hydroplaning which can happen when power sanding on overly-wet surfaces.
The foam backing provides plenty of control and consistent contact with the surface - great for preserving orange peel. Can be used with a soft interface pad for added conformability over curved surfaces.
When used with other 3M™ Trizact™ abrasives and one of the 3M™ Perfect-It™ Paint Finishing Processes, they can reduce overall polishing time.
3M™ Trizact™ Hookit™ 3000-grade Foam Abrasive Discs are available in 3-, 5-, and 6-inch diameter discs and 2 3/4 x 5 1/2-inch sheets.
Typical Properties
Resources
Related products
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labelled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labelled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards, as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
